Skenor, rails & adaptrar
Här hittar ni våra M-lok/Picatinny skenor, andra adaptrar för handskydd osv.
Till samtliga M-lok skenor så ingår allt du behöver för att montera dem.
16 artiklar
Designed for use with all M-LOK compatible Hand Guards and Forends, M-LOK Aluminum Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.
Machined from milspec-anodized aluminum, M-LOK Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
319 SEK
ASAP QD är ett fäste för vapenremmar till AR15/M4 karbiner och speciellt anpassat för att passa vapenremmar som använder QD Sling Wivel fästen.
Monterad så ger det skytten ökad flexibilitet och rörlighet.
ASAP QD är anpassad för både vänster- och höger skyttar.
Made from precision cast black Melonite™ finished steel and compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions.
Monterad så ger det skytten ökad flexibilitet och rörlighet.
ASAP QD är anpassad för både vänster- och höger skyttar.
Made from precision cast black Melonite™ finished steel and compatible with both Mil-Spec and Commercial-Spec carbine receiver extensions.
479 SEK
The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories.
Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses. A self-locking reusable thread patch is added to the screws to ensure a secure fit upon installation.
Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses. A self-locking reusable thread patch is added to the screws to ensure a secure fit upon installation.
99 SEK
The RSA provides a low profile forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems.
Made from nitrocarburized steel for wear and corrosion resistance, the RSA attaches to any 1913 Picatinny rail and has been proven to withstand stress tests of over 300 pounds while only weighing a mere 1.3 ounces.
Made from nitrocarburized steel for wear and corrosion resistance, the RSA attaches to any 1913 Picatinny rail and has been proven to withstand stress tests of over 300 pounds while only weighing a mere 1.3 ounces.
435 SEK
- 15%
The Magpul® M-LOK® Dovetail Adapter - 2 Slot for RRS®/ARCA® Interface is a lightweight, machined, Mil-Spec hard anodized aluminum mounting plate that is designed for M-LOK slot compatible hand guards and is fully compatible with most accessories—bipods, tripods, etc.—that use the RRS Dovetail Standard.
765 SEK650 SEK
Offset montering för optik eller lampa.
The M-LOK Offset Light/Optic Mount, Aluminum provides the user with an ambidextrous platform to mount weapons lights or optics at both the 11 and 1 o’clock positions on M-LOK compatible hand guards. This mounting solution is constructed of Mil-Spec anodized aluminum and has beveled ends and corners to prevent snagging. The Offset Light/Optic Mount allows for the direct attachment of the Surfire M300/600 Series Scout Light or other MIL-STD-1913 Picatinny mounts. The optional Magpul Light Mount V-Block and Rings can also be used to attach hand held lights with a diameter from .75” to 1.03”.
The M-LOK Offset Light/Optic Mount, Aluminum provides the user with an ambidextrous platform to mount weapons lights or optics at both the 11 and 1 o’clock positions on M-LOK compatible hand guards. This mounting solution is constructed of Mil-Spec anodized aluminum and has beveled ends and corners to prevent snagging. The Offset Light/Optic Mount allows for the direct attachment of the Surfire M300/600 Series Scout Light or other MIL-STD-1913 Picatinny mounts. The optional Magpul Light Mount V-Block and Rings can also be used to attach hand held lights with a diameter from .75” to 1.03”.
539 SEK
The Magpul® M-LOK® Dovetail Adapter – Pro Chassis Full Rail for RRS®/ARCA® Interface is a lightweight, machined, Mil-Spec hard anodized aluminum mounting plate that is designed for the Magpul Pro 700 rifle chassis and is fully compatible with most accessories--bipods, tripods, etc.--that use the RRS Dovetail Standard.
The M-LOK Dovetail Adapter features multiple drilled and tapped holes that are optimally located to limit overall travel of accessories. It has comfortable, yet functional, snag-resistant beveled edges and it has a feature that allows access to the front action screw without requiring removal of the Dovetail Adapter from the chassis. Optimally-placed recoil/impact mitigation lugs ensure the M-LOK Dovetail Adapter remains securely in place throughout the most rugged use and heaviest recoil impulses, making the M-LOK Dovetail Adapter a rugged, repeatable and precise mounting solution.
Made in the USA.
The M-LOK Dovetail Adapter features multiple drilled and tapped holes that are optimally located to limit overall travel of accessories. It has comfortable, yet functional, snag-resistant beveled edges and it has a feature that allows access to the front action screw without requiring removal of the Dovetail Adapter from the chassis. Optimally-placed recoil/impact mitigation lugs ensure the M-LOK Dovetail Adapter remains securely in place throughout the most rugged use and heaviest recoil impulses, making the M-LOK Dovetail Adapter a rugged, repeatable and precise mounting solution.
Made in the USA.
1 149 SEK
