Rödpunktsfästen

Välj din pistol i listan.

Color Black Hardcoat Anodized
Footprint Aimpoint Micro
Height 57 mm/2.25"
Interface Picatinny Rail
Magnifier Yes
Optional Rail Yes
Quick Release No

Acro Fixed Mount 22mm för piccatinny

Denna platta behövs för att nyttja Arisakas sido-montage.

Välj adapter efter vilken optik du tänkt använda.

Standard height (for 1.5" to 1.8" scope mounts):

Plate 1: Docter, Eotech, Insight, Meopta, Vortex Venom/Viper, Burris Fastfire III
Plate 2: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
Plate 3: C-More, Vortex Razor, SIG Romeo 3
Plate 4: Leupold Delta Point Pro, JPoint, Shield RMS
Plate 5: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530
Plate 6: Aimpoint Acro
Plate 13: Holosun 509T
Plate 15: SIG Romeo 1 and Romeo 1 Pro
Plate 17: Picatinny Rail
Plate 18: Holosun 407K, 507K

Tall height (1.9" to 2.2" scope mounts):

Plate 8: Trijicon RMR, SRO, Holosun 407C, 507C, 508T
Plate 11: Aimpoint Micro T1/T2/H1/H2, SIG Romeo 4, 5 (not 5X), Holosun HS403 (not A), HS503, HS515, HS530

Perfekt för jaktbössan eller PCC Karbinen.

The KENU optic riser puts any lower 1/3 height optic to a much more desirable 2.33" centerline height. The riser allows the shooter to mount both their optic and a magnifier to the riser platform making it easier to find the eye box on any magnifier by placing it higher, further back, and closer to the shooters eyes requiring less strain to lean down into the rifle with a standard mounted optic / magnifier.

Passar Trijicons MRO

The Night Height Mount places micro footprint optics at a 2.33” optic centerline allowing the shooter to passively aim while shooting with night vision or protective masks. This height is ideal for keeping a more natural heads-up stance and allows the shooter to scan surroundings without coming off the weapon.

By using a simple dual bolt mounting system the Night Height Mount maintains a snag free signature while distributing the clamping stress across as large a surface as possible.

The mount features a “look-through” design that allows the use of iron sights and reduces the overall weight of the mount without sacrificing strength or durability.

Warne Shotgun Rib Reflex fästet har en fästdesign som låter dig montera olika reflexsikten på de flesta hagelgevär med ventilerad spång. Många populära hagelgevärmodeller är inte borrade och gängade för vanliga kikarsiktesbaser eller skenor, Warnes unika klämdesign fäster direkt på en ventilerad pipa och ger en lågprofils universell monteringsplatta som passar de flesta populära reflexsikten.



Passar:



Burris Fast Fire 2 & 3

CMORE RTS & STS

Doctor

Eotech MRDS

Holosun 507c/407c V1-versioner

Holosun 507c/407c V2-versioner

Insight MRDS

Leupold Delta Point

Leupold Delta Point Pro

Shield RMS

Sig Romeo 3

Sig Romeo 3 Max

Sig Romeo 3 XL

Trijicon RMR

TrueGlo

UTG Reflex Micro Dot

Vortex Razor

Vortex Venom

Vortex Viper

Och andra med samma hålbild.

Picatinny Rail for attaching a laser illuminator, etc., to the front of the RD/RDF series of mounts.

Rail: 80 mm/3.15"
Length: 96 mm/3.78" (from front of mount)
OAL: 121 mm/4.76"
Weight: 28 g/1 oz

Note: Includes M5 Torx 20 screw

The C1 ACRO RDM is the next generation of Aimpoint mounts. This is a super rugged mount with a minimal foot print, solid mounting system and elegant C1 styling. Allows the use of any C1 J-arm socket accessory. 7075 T6 Aluminum with integral recoil lug, Mil Spec Type lll Hardcoat Anodized. 1.43" absolute co-witness height.

Denna är perfekt för dig som har Rödpunkt, Förstoringssats och termiskt och/eller laser. Inga specialfästen med höjder behövs, utan du kör original men får ändå upp siktena så du kan tex skjuta passivt med bildförstärkare. This is the solution to have your laser/thermal, optic, and magnifier mounted together on the same riser. The ability to mount a variety of optics and lasers on the same riser is the perfect setup for smaller PDW / Sub guns. If you want your rifle to be more balanced focusing the weight in the center this will achieve that. Any lower 1/3 optic on the XL will give you a 2.33" centerline height. Ideal for passive aiming under night vision, gas masks, and maintaining a general heads up position while shooting. DETAILS: Height: 1" Width: 1.25" Length: 8.06" Optic Centerline: 2.33" Rise above mounting surface: 0.76" 20 Slots Torque: 22-25 INCH LBS Material: 7075-T6 Aluminum, Rail Grabber 7075-T6 Aluminum Weight: 4.1 oz Included Hardware: T20 TORX pre installed on mount(x2) Made in USA Type III Hard Coat Anodization

Monterings adapter för Laser / Termiskt framför Rödpunkt vid användande av Overbore systems Night height montage.

SALT - This stand alone laser thermal mount gives you the ability to run a diving board like setup without the riser and optic mount being one piece. You can move it anywhere on the picatinny top rail facing forward, or in reverse for certain thermal and laser devices. The SALT can also be used to host a FTS magnifier like the EOtech G33. The spacer plate is not required, keeping the profile tucked in when the magnifier is stowed. Optics like the EOTECH EXPS-3, Lead and Steel LP1, Vortex Huey, SIG ROMEO 8T will work with the SALT if you chose to attach an optic. DETAILS: Height: 1.075" / 0.98" Width: 1.05" Length: 2.54" Torque: 22-25 INCH LBS Material: 7075-T6 Aluminum, Rail Grabber 7075-T6 Aluminum Weight: 1.6 oz Included Hardware: T20 TORX pre installed on mount(x1) Made in USA Type III Hard Coat Anodization