Tillbehör
66 artiklar
Protect your lens and minimize downrange reflection
Low profile in off position
Field repairable
Combining the technology of our ScopeCaps and HexCaps, the ScopeCap Pro features hexagonal lattice on the front lens when the cover is flipped up, which allows you to see through the optic with minimal obstruction while eliminating downrange reflections.
The Cap itself is a simple, rugged, and low-profile solution to protect your scope's lenses and eliminate any reflections from them when not in use. Our signature flipper tab is integral to the ScopeCap and allows for fast and easy removal from your scope's bezel. When doffed, they have a lower profile than traditional flip style scope caps.
Whether flipped up to take a shot or flipped down for ultimate signature reduction, the ScopeCap Pro combines all the features of products you've come to know and love from One Hundred Concepts.
AVAILABLE SIZES:
30mm
33mm (Vortex Razor HD/Viper 1-6x24)
34mm
36mm (Eotech 1-10 VUDU)
39.5mm (Leupold Mk 5HD 2-10)
53mm
59mm
65mm
VCOG-6
VCOG-8
Low profile in off position
Field repairable
Combining the technology of our ScopeCaps and HexCaps, the ScopeCap Pro features hexagonal lattice on the front lens when the cover is flipped up, which allows you to see through the optic with minimal obstruction while eliminating downrange reflections.
The Cap itself is a simple, rugged, and low-profile solution to protect your scope's lenses and eliminate any reflections from them when not in use. Our signature flipper tab is integral to the ScopeCap and allows for fast and easy removal from your scope's bezel. When doffed, they have a lower profile than traditional flip style scope caps.
Whether flipped up to take a shot or flipped down for ultimate signature reduction, the ScopeCap Pro combines all the features of products you've come to know and love from One Hundred Concepts.
AVAILABLE SIZES:
30mm
33mm (Vortex Razor HD/Viper 1-6x24)
34mm
36mm (Eotech 1-10 VUDU)
39.5mm (Leupold Mk 5HD 2-10)
53mm
59mm
65mm
VCOG-6
VCOG-8
819 SEK
- 5%
Gratis frakt på alla våra Aimpoint-sikten och en inskjutningstavla medföljer alltid!
Vi rekomenderar denna förstoringssats med Scalarworks flip up mount som du hittar HÄR
Aimpoint 3X-C erbjuder 3X förstoring med premium Aimpoint kvalitet till bra ingångspris. Förstoringstillsatsen kan användas tillsammans med samtliga Aimpoints sikten för långhållsskytte eller observation. Med variabel dioptri (-2 till +2) så hittar man alltid en inställning som passar varje individ öga. 3X-C kan också användas som en handhållen 3X monokulär enhet. Aimpoints förstoringstillsatser nyttjar punkten i Aimpoint siktet, du behöver därför aldrig nollställa siktet när du skiftar från skytte med eller utan förstoring.
3X-C är innesluten i ett stöttåligt skyddande gummiöverdrag som dessutom ger dig ett ergonomiskt grepp. Intern optisk justering gör det snabbt och enkelt att justera punkten till mitten i förstoringsenheten
Vi rekomenderar denna förstoringssats med Scalarworks flip up mount som du hittar HÄR
Aimpoint 3X-C erbjuder 3X förstoring med premium Aimpoint kvalitet till bra ingångspris. Förstoringstillsatsen kan användas tillsammans med samtliga Aimpoints sikten för långhållsskytte eller observation. Med variabel dioptri (-2 till +2) så hittar man alltid en inställning som passar varje individ öga. 3X-C kan också användas som en handhållen 3X monokulär enhet. Aimpoints förstoringstillsatser nyttjar punkten i Aimpoint siktet, du behöver därför aldrig nollställa siktet när du skiftar från skytte med eller utan förstoring.
3X-C är innesluten i ett stöttåligt skyddande gummiöverdrag som dessutom ger dig ett ergonomiskt grepp. Intern optisk justering gör det snabbt och enkelt att justera punkten till mitten i förstoringsenheten
4 849 SEK4 625 SEK
The HexCap is a ruggedly simple, snap-fit Anti-Reflection Device (ARD) that installs securely in seconds to your red dot sight with no additional hardware.
We designed the HexCap to be as low profile as possible while maintaining durability for use in the field. Its hexagonal lattice allows you to see through the optic with minimal obstruction while eliminating downrange reflections.
Anti-Reflection Devices are nothing new, but there simply aren't good options for many of the red dots on the market today – especially with the rise in popularity of top-mounted and offset red dot sights. Our goal with HexCap is to solve that problem.
We designed the HexCap to be as low profile as possible while maintaining durability for use in the field. Its hexagonal lattice allows you to see through the optic with minimal obstruction while eliminating downrange reflections.
Anti-Reflection Devices are nothing new, but there simply aren't good options for many of the red dots on the market today – especially with the rise in popularity of top-mounted and offset red dot sights. Our goal with HexCap is to solve that problem.
625 SEK
Transparent främre flip-up-skydd med integrerat ARD filter
Skyddet fälls upp och förblir uppe tills det fälls ned igen
Genomskinliga linsskydd behöver inte fällas upp - siktet är redo för användning direkt
Håller linsen torr och ren
Skyddar linsen och minimerar risken för repor
Passar Aimpoint® Acro C-2™ och P-2
999 SEK
Vortex SV3 Switchview throw lever.
Passar Razor Gen II och Gen II E
Maximera förstoringsövergångar med med Vortex SV-3 Switchview Throw Spak. Switchview fästs och lossas enkelt i förstoringsringen. SV-3 är konstruerad av stryktålig lätt, anodiserad aluminium.
Passare förstoringsringar med en diameter1.930 tum / 49 mm:
Passar Razor Gen II och Gen II E
Maximera förstoringsövergångar med med Vortex SV-3 Switchview Throw Spak. Switchview fästs och lossas enkelt i förstoringsringen. SV-3 är konstruerad av stryktålig lätt, anodiserad aluminium.
Passare förstoringsringar med en diameter1.930 tum / 49 mm:
999 SEK
- 16%
Interface for attaching Aimpoint Micro red dot sight to the side of the ISMS scope mount (4:30 or 7:30-position). Consists of a separate Aimpoint Micro footprint and an A-0227 Angled Universal Interface. Fully reversible for lefthanded use.
The A-0228 is also suitable for:
• Aimpoint CompM5
• Actus Core-2 1x20
• Athlon Midas TSR2
• Blaser RD 17
• HoloSun HS403 and Paralow 403 (except the A model,) 503, 515, and 530
• MAKdot S 1x20
• Minox RV1
• Primary Arms Micro Dots
• SIG Romeo4 & Romeo5
• Vector Optics Maverick 1×22
• Vortex Crossfire
Includes screws.
Weight: 55 g/1.9 oz
Note: The Aimpoint Micro footprint (engraved A-0228) cannot be used without the A-0227 Angled Universal Interface (included).
The A-0228 is also suitable for:
• Aimpoint CompM5
• Actus Core-2 1x20
• Athlon Midas TSR2
• Blaser RD 17
• HoloSun HS403 and Paralow 403 (except the A model,) 503, 515, and 530
• MAKdot S 1x20
• Minox RV1
• Primary Arms Micro Dots
• SIG Romeo4 & Romeo5
• Vector Optics Maverick 1×22
• Vortex Crossfire
Includes screws.
Weight: 55 g/1.9 oz
Note: The Aimpoint Micro footprint (engraved A-0228) cannot be used without the A-0227 Angled Universal Interface (included).
1 195 SEK1 000 SEK
- 16%
Article no.: A-0010
Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws.
The A-0010 footprint also matches the following, though screw sizing may vary:
• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
Height: 9.5 mm/.374"
Weight: 21 g/0.7 oz
Note: Will not fit Hunting Series mounts and rings - use H-0010 instead. Please note that the two pins are designed to be used together with the included shim plate - if the shim plate is left out the pins may bottom out in sight.
Interface for attaching Trijicon RMR Type 1 and 2 and Trijicon SRO to an ISMS scope mount. Includes shim plate and screws.
The A-0010 footprint also matches the following, though screw sizing may vary:
• Trijicon RMR
• Trijicon SRO
• Holosun HS407C
• Holosun HS507C
• Holosun HS508T
Height: 9.5 mm/.374"
Weight: 21 g/0.7 oz
Note: Will not fit Hunting Series mounts and rings - use H-0010 instead. Please note that the two pins are designed to be used together with the included shim plate - if the shim plate is left out the pins may bottom out in sight.
595 SEK502,50 SEK
- 20%
External Bubble Level Assembly designed to attach forward on the scope mount body or ring. Perfect solution for shooters who are unable to focus on the built-in level in the standard ISMS series or who has a model without a built-in level.
The angle of the assembly can be adjusted using two set screws. Includes screws.
Width: 29.5 mm/1.16”
Height: 41.6 mm/1.64”
Length: 32.1 mm/1.25”
Weight: 20 g/0.7 oz
The angle of the assembly can be adjusted using two set screws. Includes screws.
Width: 29.5 mm/1.16”
Height: 41.6 mm/1.64”
Length: 32.1 mm/1.25”
Weight: 20 g/0.7 oz
1 249 SEK1 000 SEK
Minimizes downrange reflection.
Snaps securely in place.
The HexCap is a ruggedly simple, snap-fit Anti-Reflection Device (ARD) that installs securely in seconds to your red dot sight with no additional hardware.
We designed the HexCap to be as low profile as possible while maintaining durability for use in the field. Its hexagonal lattice allows you to see through the optic with minimal obstruction while eliminating downrange reflections.
Anti-Reflection Devices are nothing new, but there simply aren't good options for many of the red dots on the market today – especially with the rise in popularity of top-mounted and offset red dot sights. Our goal with HexCap is to solve that problem.
Compatible with Aimpoint Micro:
Snaps securely in place.
The HexCap is a ruggedly simple, snap-fit Anti-Reflection Device (ARD) that installs securely in seconds to your red dot sight with no additional hardware.
We designed the HexCap to be as low profile as possible while maintaining durability for use in the field. Its hexagonal lattice allows you to see through the optic with minimal obstruction while eliminating downrange reflections.
Anti-Reflection Devices are nothing new, but there simply aren't good options for many of the red dots on the market today – especially with the rise in popularity of top-mounted and offset red dot sights. Our goal with HexCap is to solve that problem.
Compatible with Aimpoint Micro:
399 SEK
Passar: P320 X SERIES (X-FIVE, X-COMPACT, X-CARRY / M17 / M18)
Tyvärr inte legion.
The C&H Precision plates are designed, manufactured and shipped from our small family owned business in Coastal Georgia. Each plate is precision machined to the tightest tolerances on HAAS CNC machines and each plate goes through multiple quality checks before shipping to our customers.
Most of our plates feature a patented stainless steel T-Nut which provide an industry leading six to seven threads of engagement. Since all the mounting hardware is replaceable, if any mounting hardware is damaged it can be replaced without replacing the entire plate.
SPECIFICATION:
Thickness: V4 MIL / LEO Plates are .095″ to .099″ thick
Material: Plates are made from 6061 aluminum. All mounting hardware is Stainless Steel
Finish: Plates are MIL-SPEC Type III Hard Anodized – Black
Replaceable 416 Stainless Steel T-Posts for maximum thread engagement
INCLUDED:
Qty 1 – Optic Plate
Qty 2 – 4-40 Plate Mounting Screws
Qty 2 – 4-40 RMR Mounting Screws
Qty 2 – 4-40 Holosun Screws
Qty 2 – Patented 416 Stainless Steel T-Nuts
Qty 1 – VC3 Thread Locker
1 349 SEK
Transparent främre linsskydd med integrerad flip-up killFlash® ARD filter (Anti-Reflex Device) som skyddar från reflexer på linserna
Genomskinliga linsskydd behöver inte fällas upp - siktet är redo för användning direkt
Skydd och/eller ARD filter fälls lätt upp och förblir uppe tills de fälls ned igen
Håller linsen torr och ren
Skyddar linsen och minimerar risken för repor
Genomskinliga linsskydd behöver inte fällas upp - siktet är redo för användning direkt
Skydd och/eller ARD filter fälls lätt upp och förblir uppe tills de fälls ned igen
Håller linsen torr och ren
Skyddar linsen och minimerar risken för repor
1 249 SEK
Throw lever – sport scopes
While our magnification adjustment is already smooth and easy to use, our ZCO Throw Lever is designed to blend perfectly with the ocular housing design of our precision rifle scopes, giving you even more surface for quicker magnification transitions during target engagements. Milled from a single piece of high-grade aluminum and simplistic in design, installation is exceptionally easy.
1 062 SEK
Protect your rear scope lens
Low profile in off position
Field repairable
With the release of our LightCap, many customers requested we make a rear scope cap in the same style. You asked, we listened.
The Rear ScopeCap is a simple, rugged, and low profile solution to protect your scope's rear lens. Our signature flipper tab is integral to the ScopeCap and allows for fast and easy removal from your scope's bezel. When doffed, they have a lower profile than traditional flip style scope caps.
Low profile in off position
Field repairable
With the release of our LightCap, many customers requested we make a rear scope cap in the same style. You asked, we listened.
The Rear ScopeCap is a simple, rugged, and low profile solution to protect your scope's rear lens. Our signature flipper tab is integral to the ScopeCap and allows for fast and easy removal from your scope's bezel. When doffed, they have a lower profile than traditional flip style scope caps.
299 SEK
Ta foton eller filma med din smartphone genom att ansluta telefonen till okularet på en handkikare, tubkikare eller monokikare.
Passar de mest kända okularstorlekarna på marknaden, alla som har ytterdiameter mellan 33-60 mm
Okular ytterdiameter (mm) 33-60
Telefonens bredd (mm) 66-95
Funkar utmärkt på Myndoghetens tjänstetelefoner.
399 SEK
