Placard

Front panel för plate carrier eller liknande.
Passar 3st AR15 magasin.
(Midlenght)

Front panel för plate carrier eller liknande, velcro på baksidan.
Ink buckles.
Passar 3st AR15 magasin.
(Tall)

Placard med insert för 3st 556 magasin.
6-rader molle på utsidan

Adaptive Rig System Tango module

Adaptive Rig System compatible. 6 pals wide module with internal mag pouches and PALS webbing on both sides so that you can attach pouches to front and back. Rear has laser cut hook velcro which allows using the item as a placard on plate carrier.

Adjustable and removable walls allow you to adjust the size of the pouch for different magazine sizes. Adjustable ride height for magazines. Removable shock cord & plastic pull tabs. Interior lined with loop velcro which allows you to use different inserts in it.

Tango modules can be attached to each other with malice clips (side by side or stacked)

Includes removable ARS buckles, ARS sidestrap, adjustment walls and shock cord tabs.

Shot Show 2023 overview

https://youtube.com/shorts/QrQLi_Qp-2M?si=EnSIkaIECMiOmarE

Made from 500d Cordura laminate. NIR-compliant materials.

Lifetime guarantee.

För att bygga på Micro fight chassis till chest rigs.

För att bygga på Micro fight chassis till chest rigs.

Se nedan för hur ARS systemet fungerar:

Adaptive Rig System (ARS) Alpha module

1x Alpha module = placard for plate carrier

1x Alpha + 1x Bravo module = micro chest rig

2x Alpha + 1x Bravo module = split chest rig or wide chest rig (for wide rig configuration the panels need to be combibed by a 3x2 or larger molle pouch that is attached to both Alpha modules in the middle

3x Alpha + 1x Bravo module = harness or a belt kit (depending on ride height and how modules are attached to each other)

4x Alpha + 1x Bravo module = harness or a belt kit with full molle back (when the rear panels are attached to each other so that one is on the bottom and one on top)

The Alpha module works with all aftermarket shoulder straps that use 1” buckles which is the industry standard.

Instruction manual

https://issuu.com/greenforcegear/docs/ars-instruction-manual

Lifetime guarantee. Made from 500d Cordura laminate. NIR-compliant materials.

Adaptive Rig System Quad

Adaptive Rig System Quad module can be used as

- quad placard on chest rig (velcro on back)

- chest rig (add adaptive rig system bravo module)

- split front chest rig (adaptive rig system bravo + 2x Quad modules)

Quad stretch insert included. Fits AK and M4 pattern mags. Reindexing AK mags is easiest when done from one side to another, reindexing middle mags is not as easy.

Backside has hook velcro with loop backer and column of molle per side for SOCP knife or similar item.

Shock cord & plastic pull tabs included.

Removable buckles included.

FS Tube compatible.

ESSTAC front panels do not come with the Female QASM buckles.

To use our front panels on different plate carriers that are out on the market make sure you have the 1" female buckles and they are spread 6" apart from the inside of the buckles. Also make sure your carrier has loop velcro under the buckles so our front panels can attach to your plate carrier that you have.

Front panels are removable via velcro(they act as the cumberbun flap) and two ITW QASM Buckles at the top. Simply pop the two buckles and swap panels. They are built the same as our normal Kywi pouches, but instead of Webbing on the back for mounting they have Hook velcro and two buckles to integrate into the PC.

Front panels remove some excess typical of Plate carriers, no longer do you need a mounting system and front flap. So you remove some weight and streamline/thin the front of your PC.

Quad 556 is a wide pouch, best used on Large plates only. It will overhang on either side(about 1") and is best used with the cumberbun ends out to the outer edge for more grip of the velcro. This option is for those that need that extra mag up front and can live with the downsides.

Denna är med "shorty" inlägg, så 10-20ptrs magasinen kommer högre upp.

Will work wil Sig Spear 6.8/.277 magazines.

Our 762 pouches are made for normal double stack NATO 20 round 762 mags, M1A/FAL/SR25 pattern.

ESSTAC front panels do not come with the Female QASM buckles only the male buckles.

To use our front panels on different plate carriers that are out on the market make sure you have the 1" female buckles and they are spread 6" apart from the inside of the buckles. Also make sure your carrier has loop velcro under the buckles so our front panels can attach to your plate carrier that you have.

Front panels are removable via velcro(they act as the cumberbun flap) and two ITW QASM Buckles at the top. Simply pop the two buckles and swap panels. They are built the same as our normal Kywi pouches, but instead of Webbing on the back for mounting they have Hook velcro and two buckles to integrate into the PC.

Front panels remove some excess typical of Plate carriers, no longer do you need a mounting system and front flap. So you remove some weight and streamline/thin the front of your PC.

Passar: B&T Original magasin, MP5 magasin etc

Our 7.62 pouches are made for normal double stack NATO 20 round 762 mags, M1A/FAL/SR25 pattern.

ESSTAC front panels do not come with the Female QASM buckles only the male buckles.

To use our front panels on different plate carriers that are out on the market make sure you have the 1" female buckles and they are spread 6" apart from the inside of the buckles. Also make sure your carrier has loop velcro under the buckles so our front panels can attach to your plate carrier that you have.

Front panels are removable via velcro(they act as the cumberbun flap) and two ITW QASM Buckles at the top. Simply pop the two buckles and swap panels. They are built the same as our normal Kywi pouches, but instead of Webbing on the back for mounting they have Hook velcro and two buckles to integrate into the PC.

Front panels remove some excess typical of Plate carriers, no longer do you need a mounting system and front flap. So you remove some weight and streamline/thin the front of your PC.