Overbore Systems

The KENU optic riser puts any lower 1/3 height optic to a much more desirable 2.33" centerline height. The riser allows the shooter to mount both their optic and a magnifier to the riser platform making it easier to find the eye box on any magnifier by placing it higher, further back, and closer to the shooters eyes requiring less strain to lean down into the rifle with a standard mounted optic / magnifier.

The Night Height Mount places micro footprint optics at a 2.33” optic centerline allowing the shooter to passively aim while shooting with night vision or protective masks. This height is ideal for keeping a more natural heads-up stance and allows the shooter to scan surroundings without coming off the weapon.

By using a simple dual bolt mounting system the Night Height Mount maintains a snag free signature while distributing the clamping stress across as large a surface as possible.

The mount features a “look-through” design that allows the use of iron sights and reduces the overall weight of the mount without sacrificing strength or durability.

The Problem? Users have to purchase a variety of light mounts in order to find the correct fitment for their setup which can get expensive and leave room for improved fit. This problem is further complicated when passive laser aiming devices are added, like the MAWL where the body of the laser overhangs on one side of the rail, or a suppressor where the diameter is larger than the handguard. Our solution: Our unique raised and offset lobe allows for the maximum range of articulation, because of this, the user is able to fit the light body to their specific handguard, weapon light, and passive aiming setup with ease. Additionally, because the lobe is not centered over the centerline of the mount is reversible allowing further locational optimization. Unlike conventional fixed position mounts, when making adjustments to lasers or even simply removing them, one can merely loosen the center bolt and swivel the WML out of the way and swivel it back in when completed. This functionality is often found on the Scout pro or other articulating light mounts, however the SWVL has the added advantage of packageability providing the best fit every time. Width & Height: Configurable Length: 2.125” Weight: 1 Oz, 29 grams Included Hardware: x2 Magpul™ MLOK™ T-Nut x2 10-24 x 3/8” Button Head w/ thread locker x1 10-32 x 7/8“ Socket Head cross bolt x2 8-32 x 5/16“ Flat Head Light Side

Scout light Modular Extension

Overbore systems framskjutna adapter för Surefire lampor & andra lampor med "Scout"-hålbild.
Denna adapter passar på Overbore systems Swivl eller andra tillverkares lampfästen, typ Arisaka Scout mount etc.
Den är stabil och lång, gör så att lampan kommer fram och du slipper mycket av skuggan från din ljuddämpare.

Denna är perfekt för dig som har Rödpunkt, Förstoringssats och termiskt och/eller laser. Inga specialfästen med höjder behövs, utan du kör original men får ändå upp siktena så du kan tex skjuta passivt med bildförstärkare. This is the solution to have your laser/thermal, optic, and magnifier mounted together on the same riser. The ability to mount a variety of optics and lasers on the same riser is the perfect setup for smaller PDW / Sub guns. If you want your rifle to be more balanced focusing the weight in the center this will achieve that. Any lower 1/3 optic on the XL will give you a 2.33" centerline height. Ideal for passive aiming under night vision, gas masks, and maintaining a general heads up position while shooting. DETAILS: Height: 1" Width: 1.25" Length: 8.06" Optic Centerline: 2.33" Rise above mounting surface: 0.76" 20 Slots Torque: 22-25 INCH LBS Material: 7075-T6 Aluminum, Rail Grabber 7075-T6 Aluminum Weight: 4.1 oz Included Hardware: T20 TORX pre installed on mount(x2) Made in USA Type III Hard Coat Anodization

Monterings adapter för Laser / Termiskt framför Rödpunkt vid användande av Overbore systems Night height montage.

SALT - This stand alone laser thermal mount gives you the ability to run a diving board like setup without the riser and optic mount being one piece. You can move it anywhere on the picatinny top rail facing forward, or in reverse for certain thermal and laser devices. The SALT can also be used to host a FTS magnifier like the EOtech G33. The spacer plate is not required, keeping the profile tucked in when the magnifier is stowed. Optics like the EOTECH EXPS-3, Lead and Steel LP1, Vortex Huey, SIG ROMEO 8T will work with the SALT if you chose to attach an optic. DETAILS: Height: 1.075" / 0.98" Width: 1.05" Length: 2.54" Torque: 22-25 INCH LBS Material: 7075-T6 Aluminum, Rail Grabber 7075-T6 Aluminum Weight: 1.6 oz Included Hardware: T20 TORX pre installed on mount(x1) Made in USA Type III Hard Coat Anodization