Taktisk utrustning

Attaching your ear defenders directly to your helmets is an easy way to increase comfort. The ARC adapters replace the standard headband and give you the option to easily lift the cups without having to remove your helmet, this is especially nice in prolonged wear as ear defenders tend to get rather sweaty.

Installation is very easy, but be warned: this will require the destruction of the original leather headband cover!

Cut open the leather cover and remove it from the headband and wiring.
Snap the cups off from the headbands attachment points .
Snap on the ARC adapters.
Attach the ARC adapters to your helmet rails.
The connecting wiring should be placed somewhere where it won´t cause snagging, most commonly this is somewhere between the helmet shell and pads or liner. This is very much dependent on the type of helmet used, how to run the wiring will become clear once you get down to business.

Observera att frakten är dyr då det räknas som "Begränsad mängd farligt gods".

NIR / IR Dämpande sprayfärg
"NFM EC NIR Paint"

Skickas som "mindre mängd farligt gods" därav att fraktpriset är högre.

Dessar passar samtliga SAF ALS pre 2024, alltså de med den "gamla" knappen för upplåsning, ni ser att den är kortare än på 2024 modellerna.

If you run a Safariland ALS holster, you need the Nub Mod!

In use by the FBI's Hostage Rescue Team, and hundreds of U.S. Federal SWAT, Local SWAT officers, military teams and competitive shooters.

Made in the U.S., this aluminium product is blasted and finished with mil-spec anodizing.

Law tactical AR folder Gen 3-M Perfekt för att förvara geväret i en smidigare väska till och från skjutbanan, eller för dig som arbetar med karbinen dagligen och vill kunna stuva den smidigare i bilen eller liknande. Law tactical används idag av många förband inom olika försvarsmakter samt inom polisen, den har bevisat sig vara extremt pålitlig och hållbar.

Ett anteckningsblock med vattenskyddat papper som inte blänker och omslag i Polydura med användbart referensmaterial tryckt på baksidans in och utsida. Pappret är helt opåverkat av vatten. Detta block tillsammans med All Weather Pen gör att du alltid kan anteckna, oavsett väderlek.

DENNA ÄR FÖR ER SOM HAR ETT HÖLSTER PRODUCERAT 2024 OCH FRAMÅT, UTAN KANT PÅ ALS KNAPPEN.

Har ni en kant så behöver ni slipa bort den innan montage av denna.

Protect your lens and minimize downrange reflection
Low profile in off position
Field repairable

Combining the technology of our ScopeCaps and HexCaps, the ScopeCap Pro features hexagonal lattice on the front lens when the cover is flipped up, which allows you to see through the optic with minimal obstruction while eliminating downrange reflections.

The Cap itself is a simple, rugged, and low-profile solution to protect your scope's lenses and eliminate any reflections from them when not in use. Our signature flipper tab is integral to the ScopeCap and allows for fast and easy removal from your scope's bezel. When doffed, they have a lower profile than traditional flip style scope caps.

Whether flipped up to take a shot or flipped down for ultimate signature reduction, the ScopeCap Pro combines all the features of products you've come to know and love from One Hundred Concepts.

AVAILABLE SIZES:

30mm
33mm (Vortex Razor HD/Viper 1-6x24)
34mm
36mm (Eotech 1-10 VUDU)
39.5mm (Leupold Mk 5HD 2-10)
53mm
59mm
65mm
VCOG-6
VCOG-8

Välj höjd i menyn till höger
1.45 Används för att Glock 19/45 inte skall glappa i ett Safariland hölster anpassat för Glock 17

.635 Används för att kunna hölstra en Glock 17 TB i ett Safariland hölster för Glock 17

.950 Går att använda i ett Safariland Glock 17 hölster, ihop med en Glock 19/45TB (pinnen/pip stödet måste då modifieras genom att fila bort lite material på höjde, om pipskyddets ska användas)

A simple fix for those who want to run a threaded barrel, a Glock 17 in a 19 holster, or add a compensator etc. The MultiMuzzle Plug replaces the factory molded Delrin plug with a hard anodized aluminum body, with a machined Delrin plug to protect your muzzle while allowing adjustability.

You can get the specific MultiMuzzle Plug you need to modify your holster to your needs, and if desired add an additional plug to make it backwards compatible in the event you switch barrels etc. Also great for folks with SIM guns that can't have the factory 'post' in place to utilize their SIM gun in their duty holster. Replaces what is shown behind it in the image. Watch the video below to get an idea of what you need, and if you are unsure, shoot us an email with a picture of your factory plug, and what you are trying to accomplish. Please don't email 'what plug do I need' without pictures of what PLUG you have, as these holsters vary by year quite a bit. You can always buy high and put it in a vice and cut it down to fit if you need to.

Installs with the factory hardware and a supplied screw through the existing holes. No modifying the holster itself. Works for right and left handed holsters- We can't go lower than the .050 plug, so if you have the factory low plug and are trying to gain room, check out this: 6000 Series Spacer

If you still are unsure after watching the video below, email us a picture of your current factory plug, what the holster is for and what you are trying to put in it. info@otdefense.com

Also shown in main image is the Portal by Ghostmen Designs. Available at here at OT Defense and from Ghostmen Designs.

The SLS NUB MOD® is needed for users running Level III Safariland® Holsters with the ALS® lever and the SLS hood. It also works with the ALS® only (Level I) holsters for those with a larger waist girth to allow a smoother contact with the body over the ALS Nub Mod.

Upon engaging the SLS hood downward with the thumb, the users thumb cannot help but land on the NUB MOD®, releasing the weapon into the drawstroke.

ARC Rail Attachment for the 3M™ PELTOR™ ComTac VII Headset. For mounting headset onto a helmet rail system.

Accessory rail connector (ARC). Left & right side attachments for mounting the headset onto a helmet rail system.

Ett anteckningsblock med vattenskyddat papper som inte blänker och omslag i Polydura med användbart referensmaterial tryckt på baksidans in och utsida. Pappret är helt opåverkat av vatten. Detta block tillsammans med All Weather Pen gör att du alltid kan anteckna, oavsett väderlek.

he Cheat Sheet from Cole-TAC is the perfect way to keep your data in view when you need it. By mounting directly to your scope, you can see your DOPE without having to break your position. This simple but effective design works on all optics and can be positioned on either side of the scope. The Cheat Sheet is made in our shop here in the EU and comes with a lifetime warranty. Get your Cheat Sheet so you know where to dial at all times.

If you are left hand shooter then standard cheat sheet might not work for you

The HexCap is a ruggedly simple, snap-fit Anti-Reflection Device (ARD) that installs securely in seconds to your red dot sight with no additional hardware.

We designed the HexCap to be as low profile as possible while maintaining durability for use in the field. Its hexagonal lattice allows you to see through the optic with minimal obstruction while eliminating downrange reflections.

Anti-Reflection Devices are nothing new, but there simply aren't good options for many of the red dots on the market today – especially with the rise in popularity of top-mounted and offset red dot sights. Our goal with HexCap is to solve that problem.

SwiftClip® is Velocity Systems' attachment system that allows auxiliary equipment (Chest Rigs, Med Bags, E&E Bags, etc.) to swiftly clip on or off your base component whether it's your armor vest, plate carrier, LBV, etc. The SwiftClip® systems allows a stable load versus the excessive movement of simply wearing an "H-harness" over your existing armor. The system allows you to instantly change your kit to fit your operational needs with just a click. The SwiftClip is designed to accept any chest rig or other items with an ITW 1" male side release buckle. All materials and workmanship are 100% made in the USA.

If you run a Safariland ALS holster, you need the Nub Mod!

In use by the FBI's Hostage Rescue Team, and hundreds of U.S. Federal SWAT, Local SWAT officers, military teams and competitive shooters.

Made in the U.S., this aluminium product is blasted and finished with mil-spec anodizing.

Thyrm har med CLENS tagit fram en användarvänlig tear-off produkt som på ett enkelt och kostnadsbesparande sätt skyddar din vapenlampa mot krutrester och annat skräp som permanent riskerar att sota igen eller skada lampans lins och på så vis också succesivt försämra dess prestanda. Ett måste för dig som kontinuerligt tränar och skjuter med vapenlampa monterad och samtidigt vill förlänga livslängden på lampan

NEXTORCH ND30 – Taktisk Distractionsenhet för Professionellt Användande


NEXTORCH ND30 är en högpresterande taktisk distraktionsenhet designad för professionellt bruk inom polis- och militäroperationer. Utrustad med ett bländande 11 000 lumen strobeljus och en ljudnivå på 130 dB, är ND30 ett kraftfullt verktyg för att desorientera och distrahera motståndare.

Den intensivt ljusstarka stroben och det öronbedövande ljudet ger en avgörande taktisk fördel i kritiska situationer, vilket gör den till ett oumbärligt verktyg för att skapa utrymme för taktiska manövrar och neutralisera hot snabbt och effektivt.


Egenskaper:


11 000 lumen strobeljus för maximal visuell distraktion
130 dB ljudutgång för kraftfull akustisk desorientering
Kompakt och robust design för krävande miljöer

SPARK is a personal identification/marking light in a small footprint. Originally designed for industrial safety applications, SPARK is a practically unnoticeable addition to helmets, plate carriers, chest rigs, or virtually any item requiring illuminated visual identification.

Purposely simple, SPARK’s bright LED is easily activated by pressing its center to cycle between constant-on/blink/off and features a positive click for tactile feedback. SPARK is fully encapsulated in a flexible silicone body, making it water and damage resistant and backed with Velcro for ready placement.

SPARK is perfect for active IFF on helmets, vehicles, K9’s, and other kit. It is affordable enough to be issued by large agencies and units. Disposable with 200+ hour runtime.

The Cole-TAC Arm Information Center is another great way to keep your data close by. The magnetic fastener folding design allows for three different windows to keep separate information depending on the situation. Also, the durable clear windows can be written on with a dry erase or grease pencil to quickly take notes. With two adjustable elastic straps, the AIC will stay in place no matter the conditions. The AIC comes in several color options to ensure the proper match with other gear. Like all of Cole-TAC’s products, this is made in the EU and comes with a lifetime warranty. Get your Arm Information Center today and have your data ready to go.

En allväderspenna i matt svart metall som klarar av att skriva på vått papper och upp och ner i temperaturer från -34 C till +121 C.

Minimizes downrange reflection.
Snaps securely in place.

The HexCap is a ruggedly simple, snap-fit Anti-Reflection Device (ARD) that installs securely in seconds to your red dot sight with no additional hardware.

We designed the HexCap to be as low profile as possible while maintaining durability for use in the field. Its hexagonal lattice allows you to see through the optic with minimal obstruction while eliminating downrange reflections.

Anti-Reflection Devices are nothing new, but there simply aren't good options for many of the red dots on the market today – especially with the rise in popularity of top-mounted and offset red dot sights. Our goal with HexCap is to solve that problem.
Compatible with Aimpoint Micro:

Created for the FCPC but compatible with all carriers with a 2" strap, the Padded Strap Socks are a great low profile and sleek pad for adding communication routing and comfort to your plate carrier.

Dimension: 75 x 53 mm Weight: 3 g Shipping weight: 3 g

Adjustable Iris With Lens Protector. Säljes styckvis. Trött på att justera dina bildförstärkare on the go? Dessa gör så att du alltid har fokus nära och långt ifrån, men agerar även som linsskydd. Du kan såklart också justera din enhet precis som innan även med dessa på. The Infinity Cap is designed to offer end users reliable protection and enable full use of their Night Vision Devices. Built out of durable 6061 T6 Aluminum, the Infinity Cap is ready to take abuse. Securing to the NVG objective lens via threads, the Infinity Cap will not run the risk of popping off and an o-ring keeps debris out. The Infinity Cap features a polycarbonate sacrificial lens to keep your NVG objective lens from being scratched or damaged as well. Additionally, the Infinity Cap offers huge levels of focal adjustment with the patent-pending click-stop™ technology. With the turn of the Infinity Cap Turret, you can adjust the from 23.5mm down to 1mm with a click-stop™ at 5.66mm which puts you right at infinite focus. This crucial stopping point allows users to quickly shift their iris to infinity via tactile feedback, allowing users to easily identify what’s in front of them with full clarity. If lighting does not permit infinity focus, the user can gradually adjust open or open it all the way quickly if lighting conditions change rapidly. Our iris system gives you the perfect balance of adjustability and utility. Durable 6061 T6 Aluminum Housing Anodizing conforms to MIL-A-8625F Type II Class 1 and Class 2 Standard Securely mounts to the objective lens to avoid accidental removal Polycarbonate sacrificial lens for 92% light transmission O-ring for keeping debris out Adjustable Iris that goes from 1mm to 23.5mm Click-Stop™ technology allows you to quickly set the iris to infinity via a tactile “click” feedback Sacrificial lens holder can accept aftermarket accessories for pvs-14 style lens such as LIF or sacrificial lenses with an outside diameter not exceeding 32.4mm Compatibility DTNVG DTNVS DTAMS/STAMS THE-14 RNVG Compatible with PVS-14 styled optics like Carson or RPO Classics PVS-14 PVS-7 PVS-23 Argus Argus 1431 AB night vision RPNVG MOD3 BRAVO Low Light Innovations LLUL-21 Aeternus MH-1 TNVC BNVG-M ARTEMIS GSCI PVS-31C LUX-14.

Kräver limning (Ingår limm) se nedan för bra video på montage:
https://store.otdefense.com/collections/nub-mods/products/level-1-7ts-rds-nub-mod

Specifically designed for the 7TS™ RDS Holsters. This is the only NUB MOD® that will work with this holster, and it will NOT work with any other holsters.

See lever shape below- it looks similar to the lever shape used on some non-RDS holsters, but measures wider at .35" at the widest point.

Made from a highly weather and temperature resistant nylon infused with carbon fiber, with high quality temperature stable adhesive from -65 to 250F, as well as being water stable. Bottom line, this thing is not coming off without some pliers and a lot of effort.

We recommend sliding a piece of paper under the factory lever to keep any glue from getting on your holster (other than on the lever) during installation.

The Spark CAGE increases the versatility of the popular SPARK Marking Light. Molded from impact resistant polymer, it secures a single SPARK via press-fit. All four sides feature a split pass-through for standard 1″ webbing. Integral rare earth magnets allow it to attach to most metal surfaces.

Protect your rear scope lens
Low profile in off position
Field repairable

With the release of our LightCap, many customers requested we make a rear scope cap in the same style. You asked, we listened.

The Rear ScopeCap is a simple, rugged, and low profile solution to protect your scope's rear lens. Our signature flipper tab is integral to the ScopeCap and allows for fast and easy removal from your scope's bezel. When doffed, they have a lower profile than traditional flip style scope caps.

F25 is dovetail Force-To-Overcome mount

F25  combines the best futures of modern and legacy NVG mounts with out weighing more than industry standard mounts. Its infinity adjustment rail design insures Complete lack of play even as the mount experiences wear and tare

Denna nya Nub mod fungerar på alla ALS & SLS Hölster som är prodcuerade 2024 och framåt, även när den har en "kant" på ALS-Knappen.

Färg: Multicam.