Spuhr

Article no.: SP-3022

Extended cantilever. Allows the scope to be mounted 70 mm/2.76” further forward than with a non-cantilever mount.

10-degree wedge included

0 MIL/0 MOA
Height: 38 mm/1.5”
Length: 140 mm/5.51”

Color Black Hardcoat Anodized
Footprint Aimpoint Micro
Height 57 mm/2.25"
Interface Picatinny Rail
Magnifier Yes
Optional Rail Yes
Quick Release No

Interface for attaching Aimpoint Micro red dot sight to the side of the ISMS scope mount (4:30 or 7:30-position). Consists of a separate Aimpoint Micro footprint and an A-0227 Angled Universal Interface. Fully reversible for lefthanded use.

The A-0228 is also suitable for:
• Aimpoint CompM5
• Actus Core-2 1x20
• Athlon Midas TSR2
• Blaser RD 17
• HoloSun HS403 and Paralow 403 (except the A model,) 503, 515, and 530
• MAKdot S 1x20
• Minox RV1
• Primary Arms Micro Dots
• SIG Romeo4 & Romeo5
• Vector Optics Maverick 1×22
• Vortex Crossfire


Includes screws.

Weight: 55 g/1.9 oz

Note: The Aimpoint Micro footprint (engraved A-0228) cannot be used without the A-0227 Angled Universal Interface (included).

Picatinny Rail for attaching a laser illuminator, etc., to the front of the RD/RDF series of mounts.

Rail: 80 mm/3.15"
Length: 96 mm/3.78" (from front of mount)
OAL: 121 mm/4.76"
Weight: 28 g/1 oz

Note: Includes M5 Torx 20 screw

Lightweight Top Rail for MP5 and clones. Made from single billet of 7075 T651.

Height: 13 mm/0.51” (from top of receiver to top of rail)
Length: 125.0 mm/4.92”
Weight: 113 g/4 oz

Note: Current design includes a a lightening cut so that the serial number of the firearm can be seen with the top rail in place.

Set of 3 nylon cable organizers for use on our ISMS scope mounts. The organizers attach to the mount using the enclosed screws.

Length: 32 mm / 1.37"
Width: 17 mm / 0.67"
Height: 8 mm / 0.32"
Weight: 3 gr / 0.1 oz per organizer sans screws

Cantilever 40 mm/1.57”
Color Black Hardcoat Anodized
Height 38 mm
Quick Release Yes
Rail/Type Picatinny
Tilt 0 MIL/MOA
Tube Diameter 36 mm

Interface for attaching Docter/Noblex and Burris FastFire (1 through 4) sights to the Hunting Series mounts and rings. Includes screws.

The H-0011 footprint also matches the following, though screw head sizing may vary:

• Docter/Noblex Sight C / Sight 2+ / Sight III / QUICKsight 5.0 VR
• Delta Optical Mini Dot Gen II
• EOTech MRDS
• Hawke Vantage 1×25
• Leica Tempus
• MAKdot 1×25
• Sightmark Mini Shot M-Spec
• Vortex Viper & Venom
• Vomz Pilad 1×20



As the H-series of accessories are designed for our Hunting Series the finish is slightly glossier than that of the A-series versions and the interface height is slightly higher (see third picture for comparison).

Weight: 18 g/0.6 oz

Note: Will also fit ISMS mounts and rings