B&T (Brügger & Thomet)
B&T Print-X RBS 556 Compact Inconel 718 FDE SF
11 499 SEK
Fullflödes ljuddämpare från B&T som låster mot Surefires myningsanordningar.
Går under SRBS i USA.
- Lagervaror skickas inom 1-2 vardagar
- Frakt från 85:-
- Ammunition skickas EJ! Vapen skickas med postnord värde.
Beskrivning
Art.nr: SD-140996--FDE
Dessa ljuddämpare är HUB-kompatibla, vilket betyder att du kan byta bakstycket på ljuddämparen för att bytta infästningspunkt på ditt gevär.
Du kan tex ha Surefire gänga på din ena HUB och då nyttja den på alla SF kompar/flamdämpare du har och sedan byta bakstycke aka HUB till en med te.x Ase utra gänga och då använda den på dina Borelocks osv osv.
Addressing the signature issue common to reduced backpressure designs, the SRBS556 series provides the same flash reduction expected of a B&T suppressor while maintaining a remarkably quiet tone. The SRBS556 series also features a redesigned low-flash endcap, 1.375x24 TPI HUB compatibility, a new exterior texture, and a bead-blasted finish, all in a lightweight 3D-printed package
The SRBS (Slimline Reduced Backpressure System) 556 Ti suppressors are the optimal solution for comprehensive signature reduction that can survive the most aggressive use cases. SRBS offers a substantial reduction in back pressure and combustion gases with minimal increase in cyclic rate, leading to extended parts life, and improved shooter health and function. The SRBS 556 compact is at home on 10.5-inch and shorter carbines, but is ideally suited for 11.5-to 14.5-inch barrels, where it provides the best ratio of sound and flash reduction for its size. SRBS Ti suppressors are the ideal choice when weight savings is priority No. 1. Forty-percent lighter than its 718 Inconel brethren, the SRBS Ti offers substantial weight savings, yet maintains the same high-performance you’ve come to expect from our slim line reduced backpressure system suppressors in a weight class all of its own, weighing in at just 7.2 ounces with a DM HUB and 12.1 ounces with the included Rotex-SF HUB assembly.
The Print-X series features our Rotex-SF HUB adapter backward compatible with any 1.375×24 TPI HUB devices; Bead-Blasted finish; wrench flats; Print-X tube texturing; an updated low-flash endcap and B&T’s high-performance, patent-pending Star baffle system — finally available in 3D printed form.
• Fully HUB compatible, (1.375×24 TPI)
• 3D Printed of 100% Titanium or Inconel 718
• Full-auto rated-no barrel length restrictions
• An ideal choice when reduced back pressure is a requirement
Length Past Muzzle
5.45 in / 138.6mm
Du kan tex ha Surefire gänga på din ena HUB och då nyttja den på alla SF kompar/flamdämpare du har och sedan byta bakstycke aka HUB till en med te.x Ase utra gänga och då använda den på dina Borelocks osv osv.
Addressing the signature issue common to reduced backpressure designs, the SRBS556 series provides the same flash reduction expected of a B&T suppressor while maintaining a remarkably quiet tone. The SRBS556 series also features a redesigned low-flash endcap, 1.375x24 TPI HUB compatibility, a new exterior texture, and a bead-blasted finish, all in a lightweight 3D-printed package
The SRBS (Slimline Reduced Backpressure System) 556 Ti suppressors are the optimal solution for comprehensive signature reduction that can survive the most aggressive use cases. SRBS offers a substantial reduction in back pressure and combustion gases with minimal increase in cyclic rate, leading to extended parts life, and improved shooter health and function. The SRBS 556 compact is at home on 10.5-inch and shorter carbines, but is ideally suited for 11.5-to 14.5-inch barrels, where it provides the best ratio of sound and flash reduction for its size. SRBS Ti suppressors are the ideal choice when weight savings is priority No. 1. Forty-percent lighter than its 718 Inconel brethren, the SRBS Ti offers substantial weight savings, yet maintains the same high-performance you’ve come to expect from our slim line reduced backpressure system suppressors in a weight class all of its own, weighing in at just 7.2 ounces with a DM HUB and 12.1 ounces with the included Rotex-SF HUB assembly.
The Print-X series features our Rotex-SF HUB adapter backward compatible with any 1.375×24 TPI HUB devices; Bead-Blasted finish; wrench flats; Print-X tube texturing; an updated low-flash endcap and B&T’s high-performance, patent-pending Star baffle system — finally available in 3D printed form.
• Fully HUB compatible, (1.375×24 TPI)
• 3D Printed of 100% Titanium or Inconel 718
• Full-auto rated-no barrel length restrictions
• An ideal choice when reduced back pressure is a requirement
Length Past Muzzle
5.45 in / 138.6mm